Did Your Vehicle Faced A Hail Storm? Here’s What You Need To Do.

 

The body of a car is subject to shocks and collisions, but also climatic hazards such as hail. The hailstones' weight can generate multiple impacts and create bumps on the sheet metal of the car. To repair this damage, a dent removal of the bodywork or replacement of parts is then necessary. Do not panic if you have been the victim of weather damage: we tell you all about these repairs in this article!

 

Starting in the spring, hailstorms pose a threat to our farmers, but also the bodywork of our vehicles! Hailstones, even small ones, dig into the sheet metal of cars and cause multiple bumps to appear on various vehicle panels, or even on the entire body. These impacts, unattractive and dangerous for the durability of the paint, can be repaired quite easily.

 

Paintless bodywork dent removal is an old process that allows sheet metal to be straightened without having to go through sanding and painting. Practiced by many professionals, it is nonetheless accessible with a straightening kit and some good advice. Read the rest of our article to become an expert in bodywork dent removal. However, if the bumps are too numerous and badly placed, you can always consult our second-hand parts to limit the costs of these repairs.

 

This paintless dent removal technique remains the fastest, most economical and most ecological method since it most often avoids the use of spray paint. To your tools!

 

Bodywork Dent Removal

 

This process makes it possible to straighten the bodywork following different situations:

o    Dents generated by hail;

o    Dents appeared due to door knocks;

o    Bumps caused by caddy hits;

o    The bumps are generated by various projectiles (balloons, chestnuts, pinecones, etc.).

 

Note: if the shock has caused a paint chip or a scratch, a paint touch-up of the bodywork will be required!

 

For large dents, there are two main methods for body dent removal.

 

The use of angled rods: these tools allow you to slip behind the bodywork and, with a nimble hand, push the sunken parts outwards (therefore only works if the area to be repaired concerns an element behind which you can pass);

 

Dent removal with special glue: by sticking a tip in the middle of the dent, you pull to straighten the impact.

 

 

For light dents, three main dent removal techniques stand out.

 

The suction cup method consists of cleaning your suction cup, spreading a lubricant on the edges in contact with the bodywork (to facilitate its removal), then pressing the dent gently with the suction cup and finishing pulling.

 

The hair dryer method (for “soft” bumps only: thanks to temperature variations (very hot then very cold), it is possible to flatten a bump. Heat the metal in the bump to a very high temperature, without altering the paint then cool it to the coldest (use, for example, a compressed air spray) After a few tries, the dent should disappear.

 

The hammer method allows you to flatten the dent by hitting it from the inside but be careful to protect your support with a rag to preserve the paint.

 

Note that in some situations, a coat of paint will be necessary after the dent removal, especially when hailstones cause scratches, in addition to dents. In any case, a dent removal kit will be very useful to you as well as a learning curve to overcome these nasty bumps. If the hailstones have caused too much damage to your bodywork, do not hesitate to read the rest of this article to consider replacing it with a used bodywork part.

 

Replacement Of Body Parts

 

Unfortunately, dent removal with or without paint is not always possible, especially if the side body area has been severely affected. Changing the damaged part to repair the damage will then be necessary. To avoid large expenses, alternative solutions exist. Rather than buying a new part, which is added the labour of a professional, you can also opt for a used part. Find the body parts to repair your vehicle at a lower cost on this page.

 

Our society is undergoing profound transformations, in particular, to respond to ecological issues. Indeed, we are increasingly aware of the impact of our actions on the environment. With this in mind, all consumption and production sectors are concerned, whether it be fashion, means of transport, household appliances or children's toys. And auto repair is no exception.

 

If it is still difficult to do without thermal vehicles, the second-hand market offers a concrete possibility of consuming more responsibly immediately. Chef Sam provides a number of deals for bad credit auto loans in London, Ontario. Contact us for more details.